Canon imageCLASS MF7470 Basic Operation Manual page 85

4
Hold down the four corners of the
envelopes firmly, so that they and the
sealed or glued portion stay flat.
`
– Do not print on the back side of the
envelopes (the side with the flap (A)).
– If the envelopes become filled with air,
flatten them by hand before loading
them into the stack bypass.
2‑18
5
Load the envelopes, as shown below.
Feeding
Direction
The screen for selecting the paper size
appears.
– The stack bypass can hold 10 envelopes
at a time.
– Envelopes may be creased in the
printing process.
4
Specify the size and the type of the
paper you load.
For details on how to specify the paper size
and type, see "Setting Paper Size and Type for
the Stack Bypass, " on p. 2‑21.
The paper size/type setting in the [Stack
Bypass] setting screen is available if Stack
Bypass Standard Settings is set to [Off] in
Common Settings (from the Additional
Functions screen). If Stack Bypass Standard
Settings is set to [On], copying can be
performed only for the registered paper size
and type. (See, "Setting Paper Size and Type,"
on p. 2‑19.)