Storing/Editing One-Touch Buttons
You can store up to 200 destinations in the one‑touch buttons. This section describes how
to store/edit the destinations with the one‑touch button feature.
–
If Language Switch in Common Settings is set to [On], the Host Name and File Path of the file server
destination may not be displayed correctly, so you may not be able to refer to them.
–
Destinations stored in one‑touch buttons are also displayed in the Address Book.
Registering/Editing Fax Numbers
●
1
Press
(Additional Functions).
2
If a password has been set for the
Address Book, enter the password using
–
(numeric keys), then press [OK] to
enter the Address Book Settings menu. (See
Chapter 8, "System Settings, " in the Reference
Guide.)
3
4
①
①
②
②
① Select a one‑touch button to store or
change.
② Press [Register/Edit].
–
If the desired one‑touch button is not
displayed, press [▼] or [▲] to scroll to the
desired one‑touch button.
–
You can also specify the one‑touch
button's number by entering the three
digit number of the desired one‑touch
button using
–
One‑touch buttons that already have
destinations stored in them are displayed
with a black square (■) in the lower right
corner of the key.
–
If you select a one‑touch button that
already has destinations stored in it, the
destinations are displayed.
–
If you register multiple destinations as a
group address in a one‑touch button, the
number of destinations registered in the
group address is displayed.
–
(numeric keys).
4‑71