Xilinx Virtex-6 FPGA ML605 Embedded Kit Getting Started page 28

Installation and Licensing of ISE Design Suite 12.1
10. Navigate to where you saved the Xilinx.lic file and select it. See
X-Ref Target - Figure 21
11. You have now successfully installed your ISE software license. Click OK on the Success
X-Ref Target - Figure 22
Congratulations! You have now installed the ISE Design Suite 12.1 tools and set up the licenses for
the Embedded Edition of the tools. You are now ready to use Xilinx ISE Design
Suite 12.1 Embedded Edition to create or modify your custom Embedded Systems
using the MicroBlaze soft processor.
For detailed information on licensing & installation, please refer the following guide:
http://www.xilinx.com/support/documentation/sw_manuals/xilinx12/irn.pdf.
28
Figure 21: Select the Xilinx.lic File
Dialog (Figure 22) and close the Xilinx License Configuration Manager.
Figure 22: License Installation Successful
www.xilinx.com
Figure 21.
UG727_20_111309
UG727_21_111309
ML605 Getting Started Guide
UG730 (v1.1) June 14, 2010