Xilinx Virtex-6 FPGA ML605 Embedded Kit Getting Started page 25

5.
X-Ref Target - Figure 16
6.
Note:
docking stations might find there are three Ethernet HostIDs to choose from. If you select a docking
station HostID, then you will only have a license when you are docked. It is best to avoid the HostID
of your RJ45 Ethernet connection on Laptop computers, as some Ethernet adapters will power down
when not plugged into the network. If you to select an Ethernet adapter, it is best to select your
wireless card.
ML605 Getting Started Guide
UG730 (v1.1) June 14, 2010
Check the product ISE Design Suite Embedded Virtex-6 LX240T Device Locked
Edition and click on Generate Node-Locked License as shown in
Figure 16: Xilinx Entitlement Center
Follow the instructions to generate the license by providing your Host OS information
and Host ID (Disk Serial number or Ethernet MAC address) as shown in
click Next.
Laptop users may want to select their Disk ID or Wireless Ethernet card HostID. Laptops on
www.xilinx.com
Installation and Licensing of ISE Design Suite 12.1
Figure 16.
UG730_15_113109
Figure 17 and
25