Piper ARCHER III Pilot Operating Handbook page 211

PA-28-181, ARCHER
•
Multi-Function Display (continued)
Terrain Proximity (continued)
Tenain customization options are available by pressing the MENU key
while on the Navigation Map Page, and then selecting "Map Setup" then
"Map" group. Options selected on the Navigation Map page will be used on
other map pages (less the Terrain Proximity Page itself) that display terrain
information. Additional information about obstacles can be displayed by
panning over the display on the map. The panning feature is enabled by
depressing the
until it is over the obstacle
with Terrain Proximity, as there arc no aural or visual alerts lo inhibit.
Terrain Proximity Page:
The Terrain Proximity Page is specialized
in relation to the aircraft's current altitude, without cluller from the basemap.
Aviation data (airports. VO Rs, and other NAVA IDs) can be displayed for
•
reference.
Aircraft orientation on this map is always heading up unless there is no valid
heading. Two views are available relative to the position of the aircraft: the
°
360
default display and the radar- like ARC ( 120
adjustable with the RANGE Knob from I to 200 nm. as indicated by the
map range rings (or arcs).
Operation of Terrain Proximity:
The Terrain Proximity Page is localed in the Map Page Group on the MFD.
On all pages that display terrain data. obstacles and terrain are depicted with
the fol lowing colors:
• Red - above or within 100 feel below the aircraft altitude.
• Yellow - be1wee11 100 reel a11d 1000 fc..:t
• Black - more than I 000 reel below the aircraft altitude.
Terrain Proximity Alerts:
Ten-ain Proximity does not provide warning annunciations or voice alerts
associated with obstacles or terrain.
ISSUED: December 22, 2017
III
knob then pushing the knob in the desired direction
RANGE
interest. There is no inhibit function associated
or
DESCRIPTION & OPERATION
10 show terrain and obstacle data
°
) display. Map range is
the aircraft altitude.
below
REPORT: VB-2749
SECTION7
7-25