Piper ARCHER III Pilot Operating Handbook page 203

PA-28-181, ARCHER ill
•
Multi-Function Display (continued)
Crew Alerting System (CAS) Messages (continued)
Reversionary Mode - MFD
Should the PFD become inoperative, the MFD can be selected into
reversionary mode by pressing the red DISPLAY BACKUP on the audio panel.
The MFD will then show typical PFD information, including the horizon with
airplane symbol, rotating compass card with heading and course deviation,
the pilot selectable data fields, transponder information and G l000 system
messages. Autopilot annunciations will not be available on the MFD in the
reversionary mode configuration. Information retained from the MFD will also
be available, including engine parameters, flight planning information with DTK
and DIS fields, and an inset map with all features except Gannin Datalink.
Navigation
See Section 1.21 for navigation system equipment approvals and Section
•
2.25 for navigation system limitations .
•
ISSUED: December 22, 2017
DESCRIPTION & OPERATION
REPORT: VB-2749
SECTION?
7-17