Select Hdmi Over Scan; Performing Progressive Processing - Canon REALiS WUX4000 User Manual

Select HDMI Over Scan

[HDMI over scan]
HDMI
Digital PC
You can select this as required when you
project visual software using an HDMI sig-
nal.
HDMI over scan
Off
The entire input signal (100%) is pro-
jected.
The images projected may be smaller
than the full projection screen.
On
Images are projected with distortion
at the peripheral section of images
trimmed off. (The central 95% of the
images are projected.)
Part of the peripheral sections of
images may be cut out depending on
the resolution of the signal. In such a
case, select [Off].
Press the OK button to accept your setting
and then press the MENU button.
• The factory defaults settings are [On]
when [HDMI In] (P102) is set for [Auto]
and [Off] when it is set for [Computer].
Performing Progressive
Processing
Component
[Progressive]
Analog PC
You can select this as required when the
images have low resolution.
Display settings
Press the OK button to accept your setting
and then press the MENU button.
• [
• This can be set only when the [HDMI In]
• Select [Off] when flickers and horizontal
83
Setting Display Status
HDMI
Digital PC
Progressive
Off
Do not perform progressive pro-
cessing.
On
Performs progressive processing.
This mode is available when the
HDMI signal is 1080i, or Compo-
nent signal is 1080i, 1035i, 576i
or 480i.
Auto
Performs the appropriate pro-
gressive processing according to
the input signal.
Auto] is the factory default.
(P102) is [Computer] and the input signal
is 1080i, 1035i, 576i or 480i.
lines are noticeable on a fast-moving pic-
ture.
Component
Analog PC
Display settings