2
Press the pointer buttons to adjust.
Remote control
[ ] button
Reduces the length of the upper edge
[ ] button
Reduces the length of the left edge
3
When keystone distortion has been corrected, press the OK button.
■Resetting the Keystone Adjustment
Perform the following steps to reset the keystone adjustment.
Press the D.SHIFT/KEYSTONE button twice to display the [Keystone reset] window.
On the window, select [OK] with the [ ] button, and then press the OK button.
Projector
Screen
63
Adjusting the Image
[ ] button
Reduces the length of the lower edge
[ ] button
Reduces the length of the right edge