Color Space; Over Scan - Canon WUX500ST User Manual

Menu Description
Input level
> [Input settings] >
Adjust the input level for content projected via HDMI or HDBaseT.
Option
Auto Automatically switches the input level based on the input signal.
Normal Limits the input level to 16 - 235.
Expanded Enables a full input level of 0 - 255.
• You can select this only when the type of signal sent from AV equipment is RGB.
• In [Auto] mode, the signal level is selected automatically. (Some AV equipment and
HDBaseT transmitters may not support this.)
• If your AV equipment HDMI output can be set to [Normal] or [Expanded], we
recommend [Expanded]. The contrast of images will be improved and dark scenes will
be rendered more realistically. In this case, set [Input Level] to [Auto] or [Expanded].
For more detailed information, refer to the user's manual for the AV equipment
connected to the projector.

Color space

> [Input settings] >
Select the color space for HDMI or HDBaseT signals.
Option
Auto Selects the optimal color format for input signals.
RGB Forces the projector to handle the input signal as an RGB signal.
Forces the projector to handle the input signal as a color difference
YCbCr
signal.

Over scan

> [Input settings] >
Select this setting to trim peripheral distortion from content projected via HDMI or
HDBaseT.
Option
Project all (100%) of the input signal.
Off
The images projected may be smaller than the full projection screen.
Project images with peripheral distortion removed. (5% of the image is
On
trimmed, along the edges.)
With some signal resolutions, image edges may be cut off. In such a case, select [Off].
[Input level]
[Color space]
[Over scan]
82
Function
Function
Function