Connecting The Projector; Connecting The Projector To A Computer; Connecting To Rgb Monitor Output Terminal (Analog Connection) - Canon REALiS WUX4000 User Manual

Connecting the Projector

Connecting the Projector to a Computer

Connect the projector to the computer.
A digital connection (P40) is recommended when projecting a WUXGA or UXGA image in
high quality.
When using a computer with an HDMI output terminal, a digital connection (P41) can be
made using an HDMI cable.
Before connecting the cables, turn off both the projector and computer.

■Connecting to RGB Monitor Output Terminal (Analog Connection)

VGA cable (Input signal type: [Analog PC] – P48)
Computer
Monitor output ter-
minal
(mini D-sub 15-pin)
AUDIO OUT terminal
(AUDIO OUT)
• Use a VGA cable in which all pins are connected. If the cable is a type in which all pins
are not connected, the image may not be correctly displayed.
• Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
will reduce the audio volume.
VGA cable (supplied)
When inputting corresponding audio.
Audio cable (not included)
To ANALOG PC / COM-
PONENT IN
39
Projector
To AUDIO IN