Mail Authentication Settings [Mail Auth] - Canon REALiS WUX4000 User Manual

■Mail Authentication Settings [Mail auth]

From [Mail auth] in the settings window, you can configure the settings for authentica-
tion of mail that is sent when an error occurs. For the setting procedure, refer to "Dis-
playing and Configuring the Network Configuration Screen" (P142).
Item
Mail authentication
User name
Password
Confirm password
POP3 server IP address
POP3 server port number
POP before SMTP response time
Explanation
Select the mail authentication method.
If OFF is selected, the other mail
authentication settings cannot be
changed.
Enter the user name to use for mail
authentication in 1-byte alphanu-
meric characters and symbols (1 - 63
characters).
Enter the password for mail authenti-
cation in 1-byte alphanumeric charac-
ters and symbols (1 - 63 characters).
For confirmation, enter the same
password as you entered in [Pass-
word].
Enter the POP3 server IP address in
1-byte numbers.
Enter the POP3 server port number in
1-byte numbers (1 - 65535).
Enter the wait time from POP3 authen-
tication to SMTP authentication (units:
milliseconds) using 1-byte numbers
(0 - 9999 milliseconds).
149
Setting Up the Network
Factory default set-
OFF
<Blank>
<Blank>
<Blank>
0.0.0.0
110
300
ting