Table of Contents
Advertisement
Setting Display Status
Select HDMI Over Scan
[HDMI over scan]
HDMI
Digital PC
You can select this as required when you
project visual software using an HDMI sig-
nal.
MENU > [Display settings] > [HDMI over scan]
MENU > [Input settings] > [HDMI over scan]
Off
The entire input signal (100%) is pro-
jected. The images projected may be
smaller than the full projection screen.
On
Images are projected with distortion
at the peripheral section of images
trimmed off. (The central 95% of the
images are projected.)
Part of the peripheral sections of
images may be cut out depending on
the resolution of the signal. In such a
case, select [Off].
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
Component
Analog PC
• The factory defaults settings are [On]
100
when [HDMI In] (P127) is set for [Auto]
and [Off] when it is set for [Computer].
Advertisement
Table of Contents
