Screen When Blank; Selecting A Logo At Startup; Selecting Aspect Ratio Of Screen - Canon REALiS WUX4000 User Manual

Selecting a Logo at Star-
tup
[User screen settings] - [Projector on]
HDMI
Digital PC
You can display a specified logo on the
screen from the moment the projector is
turned on to the moment it is ready for pro-
jection.
User screen settings
Projector on
Skip
Projects an input signal
immediately after turning on
the projector.
Canon logo
Displays the Canon logo that
was registered in advance at
the factory.
Press the OK button to accept your setting
and then press the MENU button.
• [Canon logo] is the factory default.
Selecting Aspect Ratio of
Screen
[Screen aspect]
Component
Analog PC
Select according to the aspect ratio of the
projection screen. (P52)
Display settings
Press the OK button to accept your setting
and then press the MENU button.
• [16:10] is the factory default.
• If you select [16:9 D. image shift] or [4:3 D.
• [Auto] may be automatically selected for
87
Setting Display Status
HDMI
Digital PC
Screen aspect
16:10
Select this when you use a screen
with an aspect ratio of 16:10.
16:9
Select this when you use a screen
with an aspect ratio of 16:9.
4:3
Select this when you use a screen
with an aspect ratio of 4:3.
16:9
Select this when you use a screen
D.
with an aspect ratio of 16:9.
image
You can move the screen upward
shift or downward with the D.SHIFT/
KEYSTONE button.
4:3
Select this when you use a screen
D.
with an aspect ratio of 4:3.
image
You can move the screen to the
shift left or right with the D.SHIFT/KEY-
STONE button.
image shift], the keystone correction will
be canceled. For more details, refer to
page 53.
the aspect depending on the screen
aspect setting.
Component
Analog PC
Display settings