How To Use Menus; Menu Configuration - Canon REALiS WUX4000 User Manual

How to Use Menus

Use the menus to set the operation of the projector in detail.

■Menu Configuration

The menu screen is divided into 5 tabs as shown below.
[Display settings] tab
(P77)
You can set the type of signal
or the method of projection of
the images input.
[Image adjustment] tab
(P88)
You can adjust the image quality
and colors according to your
preference.
Input Signal Types for which a Menu Item is Displayed
Different menu items are displayed for different input signal types.
In the following explanation of each menu item, the input signal type for which the
menu item is displayed is indicated as follows:
Input signal for which the
menu item is displayed
Input signal for which the
menu item is not displayed
You can set the operation of the projector.
Contents of menu
HDMI
Digital PC
[System settings] tab (P98)
[Network Setting] tab (P137)
These settings are for when using the
projector from a PC via a network.
For the network settings, refer to "Con-
necting to a Network" (P131).
[Information] tab (P110)
You can check information about the
signal types of the images projected
and other projector-specific informa-
tion.
Menu items
74
Component
Analog PC