Canon REALiS WUX4000 User Manual page 146

Configuring the Network From the Computer
The error meanings are as shown below.
Input error
Password setting error
Invalid SMTP
System failed to connect SMTP
server.
System failed to connect POP3
server.
System doesn't support this auth
type.
System failed to authenticate.
The system failed to send the test
mail.
Save Failed
Error Meaning
A setting outside the valid range was set on the
setting screen.
The set password and confirmation password did
not match.
The SMTP server IP address has not been set.
Failed to connect to the SMTP server when send-
ing a test mail.
Failed to connect to the POP3 server attempting to
send a test mail.
An authentication type was set which is not sup-
ported by the server.
Authentication failed attempting to send a test mail.
Sending of test mail failed due to a connection fail-
ure with the SMTP server or an error which does
not ordinarily occur.
Mismatch in settings occurred when settings were
changed at the same time from multiple comput-
ers.
146