Selecting An Input Signal (Input); Types Of Input Signals - Canon REALiS WUX4000 User Manual

Selecting an Input Signal (INPUT)

Select the input signal in the [Input] menu when you want to project a digital PC or AV
equipment signal, or to switch between inputs when multiple computers or multiple sets
of AV equipment are connected.
Skip this step if you have not changed the input signal since the last projection.

■Types of Input Signals

The table below shows the relationship among input signals supported by the projector,
input terminals and connection cables.
Input signal
HDMI
Digital PC
Analog PC
Component
Input terminal
HDMI cable (not included)
DVI-D cable (not included)
VGA cable (supplied)
BNC cable (not included)
/
COMPONENT IN
Mini D-sub 15-pin - BNC
terminal converter cable
(not included)
Component cable (not included)
/
COMPONENT IN
Types of connection cables
48
BNC cable
(not included)
D terminal plug - RCA plug
component conversion ca-
ble (not included)
RCA plug - RCA plug com-
ponent cable (not included)