Lens Shift Reset; Extending The Menu Display Time - Canon REALiS WUX4000 User Manual

Lens Shift Reset

[Other settings] - [Lens shift Reset]
HDMI
Digital PC
Resets the lens shift (P60) setting to the
standard position.
Other settings
Lens shift Reset
Select [Lens shift Reset] and press the OK
button. The following screen for confirma-
tion appears.
Use the [ ] / [ ] buttons to select the
standard position, and then select OK.
• The standard position varies depending
on the type of lens unit used. For details,
refer to "Resetting the Position". (P61)
• The position which was adjusted by lens
shift does not change when the power is
turned off.
Extending the Menu Dis-
play Time
[Other settings] - [Menu display time]
Component
Analog PC
You can extend the menu display time from
the normal setting of 30 seconds to 3 minutes.
System settings
Press the OK button to accept your setting
and then press the MENU button.
• [Normal] is the factory default.
• The following display and operation are
105
Setting Various Functions
HDMI
Digital PC
Other settings
Menu display time
Normal
The menu is displayed for 30 seconds.
Extended The menu is displayed for 3 minutes.
also changed.
Item
The display time of the following
screens
-Input (P49)
-Zoom adjustment (P58)
-Focus adjustment (P59)
-Keystone adjustment (P62)
-Keystone reset (P63)
-D.image shift adjustment (P54, P55)
-D.image shift reset (P55)
-Aspect (P57)
-Image mode (P64)
-Volume adjustment (P69)
-Lamp mode (P97)
-Lens shift (P60)
-Lens shift reset (P105)
Press-and-hold operation of
pointer buttons other than for
[Zoom adjustment], [Focus
adjustment], and [Lens shift]
Press-and-hold operation of
VOL button
Press-and-hold operation of the
D.ZOOM button
Component
Analog PC
System settings
[Normal] [Extended]
4 to 10
3 minutes
seconds
Enabled Disabled