Color Space; Over Scan - Canon WUX6010 User Manual

• You can select this only when the type of signal sent from AV equipment is RGB.
• In [Auto] mode, the signal level is selected automatically. (Some AV equipment and
HDBaseT transmitters may not support this.)
• If your AV equipment HDMI output can be set to [Normal] or [Expanded], we
recommend [Expanded]. The contrast of images will be improved and dark scenes will
be rendered more realistically. In this case, set [Input Level] to [Auto] or [Expanded].
For more detailed information, refer to the user's manual for the AV equipment
connected to the projector.

Color space

> [Input settings] >
Select the color space for HDMI or HDBaseT signals.
Option
Auto Selects the optimal color format for input signals.
RGB Forces the projector to handle the input signal as an RGB signal.
Forces the projector to handle the input signal as a color difference
YCbCr
signal.

Over scan

> [Input settings] >
Select this setting to trim peripheral distortion from content projected via HDMI or
HDBaseT.
Option
Project all (100%) of the input signal.
Off
The images projected may be smaller than the full projection screen.
Project images with peripheral distortion removed. (5% of the image is
On
trimmed, along the edges.)
With some signal resolutions, image edges may be cut off. In such a case, select [Off].
[Color space]
[Over scan]
85
Menu Description
Function
Function