Steps For Connecting The Projector And Projecting An Image - Canon REALiS WUX4000 User Manual

Steps for Connecting the Projector and Projecting an Image

Installation work should be performed by a quali-
fied technician. Contact the Canon Customer Sup-
port Center for further information.
Connecting the Projector to Equipment (P128)
Starting Projection (P45)
Do you want to project an image from a
notebook computer?
Selecting an Input Signal (P48)
Is the image projected properly?
Adjusting the Image (P50)
Make the following adjustments.
• Setting the Display Resolution of the Computer (P50)
• Selecting an Aspect Ratio of Projected Image (Screen aspect) and a Screen
Mode (Aspect) (P52, P56)
• Adjusting Misaligned Images or Flickering of the Screen Using the Auto PC (P51)
• Adjusting the Image Size (P58)
• Adjusting the Focus (P59)
• Adjusting the Image Position (Lens shift) (P60)
• Adjusting Keystone Distortion (P62)
Making Fine Adjustments
• Selecting an Image Mode (P64)
No
No
38
For a notebook computer,
Yes
turn on the monitor output
(P47) and then proceed.
Yes
Projection is complete.