Hdmi Input Range - Canon LV-WU360 User Manual

Setting
HDMI Setup
When the external device is connected to the HDMI
terminal of the projector, and the images can not be
projected normally, please switch on the Image or
Sound setting.
Press < MENU > button on the remote controller or on
the top control panel to display the OSD menu.Press
button to select the Setting menu ,then press
<OK> or button to enter the sub-menu.
1) Press button to select [HDMI Setup] menu.
2) Press <OK> button.
● Display [HDMI Setup] instantly.
3) Press button to select [Image] or [Sound] .
4) Press <OK> button.
Note:
● HDMI option can be chosen only in HDMI-1 and
HDMI-2 channel.

HDMI Input Range

Auto Set the signal level automatically.
Limited Input the limited signal level from 16 to 235.
Full Input the full signal level from 0 to 255.
Note:
● The best settings about projectors may differ slightingly from your external output device .
● For external output, please refer to the instructions for use of the external device.
Sound
When connect to the HDMI cable to tansmit images and audio while the users
HDMI
don't need connect to audio signal separately.
Audio I/F When the external audio signal would be input through AUDIO IN terminal.
EQ Setting
Change the HDMI reception level according to the AV device connected to the
MODE1-4 HDMI input terminal. If noise appears in the image or the image does not appear,
change the settings.
HDMI Setup
Setting
Direct Power On
Standby mode
High Altitude
Lamp control
Cooling fast
Closed caption
Key lock
lris
Sound
HDMI Setup
62
Off
Eco
Off
Normal
Off
On
...