Canon REALiS WUX4000 User Manual page 120

Installing / Removing the Lens Unit
2
Loosen the cosmetic panel screw, then slide the cosmetic panel toward the rear to
remove it.
The cosmetic panel screw is attached to the cosmetic panel and designed to prevent
it from falling off.
3
In order to prevent damage, close the lamp cover and temporarily fasten the screw.
4
Remove the sleeve screws (2 on top and 2 on bottom).
After the 2 screws on top are removed, turn the projector upside down on a flat desk
or similar location and remove the 2 screws from the bottom.
120