Removing The Lens Unit - Canon REALiS WUX4000 User Manual

■Removing the Lens Unit

1
Perform steps 1 to 5 of "Installing the Lens Unit"
sleeve.
2
Disconnect the lens cable from the lens connector.
When pulling out (disconnecting) the lens cable, press the buttons on both sides of the lens
cable connector while pulling out the cable.
3
Fix the lens cable as shown in the illustration and loosen the 4 screws to remove the
lens unit.
The 4 lens unit screws are attached to the lens unit and cannot be removed.
Installing / Removing the Lens Unit
(P119 – P121) and remove the
123