Select Hdmi Over Scan; Performing Progressive Processing - Canon ReallS SX80 User Manual

Select HDMI Over Scan

[HDMI over scan]
HDMI
DIGITAL PC
ANALOG PC
HDMI over scan
You can select this as required when you
project visual software with the HDMI sig-
nals.
Off The entire input signals (100%) are pro-
jected.
The images projected may be smaller
than the full projection screen.
On Images are projected with disorders at
their peripheral section of images
trimmed off. (The central 95% of the
images are projected.)
A part of peripheral sections of images
may be cut out depending on the resolu-
tion of the signals. In such a case, select
[Off].
Press the OK button to accept your setting
and then press the MENU button.
• [On] is the factory default.

Performing Progressive Processing

[Progressive]
COMPONENT
VIDEO/S-VIDEO
USB
Display settings
You can select this as required when the
images have low resolution.
Press the OK button to accept your setting
and then press the MENU button.
• [Auto] is the factory default.
• You can set this mode for either [HDMI],
• Select [Off] when flickers and horizontal
• For the details of the progressive pro-
79
HDMI
DIGITAL PC
ANALOG PC
Progressive
Off Do not perform the progressive pro-
cessing.
On Perform the progressive processing.
This mode is available when the
HDMI signal is 1080i or, VIDEO/S-
VIDEO or COMPONENT signal is
1080i, 1035i, 576i, or 480i.
Auto Perform the appropriate progressive
processing depending on the input
signal.
[COMPONENT], [VIDEO] or [S- VIDEO].
lines are noticeable on a fast-moving
picture.
cessing, refer to the page 137.
Setting Display Status
COMPONENT
VIDEO/S-VIDEO
USB
Display settings