Canon REALiS WUX4000 User Manual page 154

Controlling the Projector from a Computer
5
The projector control screen appears. The projector can be controlled from this
screen.
Item
Projector name
IP address
Refresh
Power
Input
Aspect
Image mode
Blank
Mute
Auto PC
Information
6
When the operations are finished, click [Back to top] to return the initial web screen.
The name of the connected projector is displayed. (P151)
The IP address of the connected projector is displayed. (P147)
Refreshes the displayed contents with the most recent informa-
tion.
Turns projector power on or off.
Select an input signal and click [Apply] to change to that input
signal. (P48)
Select an aspect and click [Apply] to change to that aspect. (P56)
Select an image mode and click [Apply] to change to that image
mode. (P64)
Switches the blank setting on or off. (P68)
Switches the mute setting on or off. (P69)
Performs Auto PC. (P51)
The control results and control error information are displayed at
the bottom of the screen.
154
Explanation