Error Mail - Canon REALiS WUX4000 User Manual

Error Mail

The messages shown in the following error list are sent when an error occurs in the pro-
jector.
Error list
Errors related to Error
temperature name
Text
Errors related to Error
the lamp name
Text
Errors related to Error
the lamp cover name
Text
Errors related to Error
the cooling fan name
Text
Errors related to Error
the power supply name
Text
Errors related to Error
the lens connec- name
tor
Text
Errors related to Error
the air filter name
Text
Other types of Error
errors name
Text
* For details, contact the Canon Customer Support Center.
Temperature abnormality
The temperature inside the projector is too high for some reason or the
outside air temperature is higher than the specified one.
If the problem is inside the projector, check whether the projector is
installed and operated normally, turn off the projector to cool its inside,
and retry projection. If the same warning occurs again, the projector
may be defective. Contact your dealer.
Faulty lamp
The lamp has burnt out. Replace the lamp with a new one. If the same
warning occurs again, the lamp drive circuit may be defective. Con-
tact your dealer.
Faulty lamp cover
The lamp cover is open. Check whether the lamp cover is installed
properly. If it is installed properly, the lamp cover detection switch may
be defective. Contact your dealer.
Faulty cooling fan
The cooling fan or another component may be defective. Contact your
dealer.
Faulty power supply
The voltage of part of the power supply is abnormally high or any
other problem has occurred in the power supply. Contact your dealer.
Faulty lens connector
The lens cable is not connected to the lens unit. Check whether the
lens cable is connected to the lens unit properly.
If it is connected properly, the lens connector or cable may be defec-
tive. Contact your dealer.
Faulty air filter unit
The air filter unit is not installed properly.
Check whether the air filter unit is installed properly.
If it is installed properly, the air filter unit detection switch may be
defective. Contact your dealer.
Unknown Error
Code in hexadecimal numbers*
155