Select Hdmi Over Scan; Performing Progressive Processing - Canon REALiS WUX10 Mark II User Manual

Select HDMI Over Scan

[HDMI over scan]
HDMI
DIGITAL PC
ANALOG PC
HDMI over scan
You can select this as required when you
project visual software with the HDMI sig-
nals.
Off The entire input signals (100%) are pro-
jected.
The images projected may be smaller
than the full projection screen.
On Images are projected with disorders at
their peripheral section of images
trimmed off. (The central 95% of the
images are projected.)
A part of peripheral sections of images
may be cut out depending on the resolu-
tion of the signals. In such a case, select
[Off].
Press the OK button to accept your setting
and then press the MENU button.
• [On] is the factory default.

Performing Progressive Processing

[Progressive]
COMPONENT
VIDEO
Display settings
You can select this as required when the
images have low resolution.
Press the OK button to accept your setting
and then press the MENU button.
• [Auto] is the factory default.
• You can set this mode for either [HDMI],
• Select [Off] when flickers and horizontal
• For the details of the progressive pro-
81
HDMI
DIGITAL PC
ANALOG PC
Progressive
Off Do not perform the progressive pro-
cessing.
On Performs the progressive processing.
This mode is available when the
HDMI signal is 1080i or, VIDEO or
COMPONENT signal is 1080i, 1035i,
576i, or 480i.
Auto Performs the appropriate progres-
sive processing according to the
input signal.
[COMPONENT] or [VIDEO].
lines are noticeable on a fast-moving
picture.
cessing, refer to the page 134.
Setting Display Status
COMPONENT
VIDEO
Display settings