Memory Color Correction; 6-Axis Color Adjust - Canon REALiS WUX4000 User Manual

Memory Color Correction

[Advanced adjustment] - [Mem. color correct]
HDMI
Digital PC
This function produces beautiful skin
tones, blues, and other colors.
Advanced adjustment
Mem. color correct
Off
Disables the memory color correc-
tion function.
L
Specifies the intensity of the memory
M
color correction in three steps.
H
Press the OK button to accept your setting
and then press the MENU button.
• The factory default settings are as follows.
- For HDMI (when [HDMI In] (P102) is set
to [Computer]), Digital PC and Analog
PC, when any image mode is used
except [VividPhoto], the default setting
is [Off]. When [VividPhoto] is used, the
default setting is [M].
- For HDMI (when [HDMI In] (P102) is set
to [Auto]) and Component, the default
setting is [L], regardless of the image
mode.
• The adjustment you have made is stored
as adjusted values for the input signals
and image mode of the current projection.

6-axis color adjust

[Advanced adjustment] - [6-axis color adjust]
Component
Analog PC
You can make fine adjustments to the
image colors with RGB (red, green, blue)
and CMY (cyan, magenta, yellow).
Image adjustment
When you have completed the adjust-
ment, press the MENU button.
• [Off] is the factory default.
• The adjustments you have made are stored
95
Selecting an Image Quality
HDMI
Digital PC
Advanced adjustment
6-axis color adjust
Off
Disables 6-axis color adjustment.
If you select [Adjust], the previous
setting of 6-axis color adjustment
becomes active again.
Adjust
Enables 6-axis color adjustment.
Use the [ ] / [ ] buttons to select
[ Hue], [
ness], then adjust them with the [ ] /
[ ] buttons.
When color adjustments are com-
pleted, press the OK button.
Reset
Returns all adjustment values to zero.
as adjusted values for the input signals and
image mode of the current projection.
Component
Analog PC
Image adjustment
Saturation], or [* Bright-