Adjusting The Image Size - Canon REALiS WUX4000 User Manual

Adjusting the Image

Adjusting the Image Size

The size of the projected image can be adjusted by pressing the ZOOM button on the
remote control or the LENS button on the projector.
Change the projector installation position if your desired image is too large or too small to
adjust it with the zoom function. (P125)
1
Press either the ZOOM button on the remote controller or the LENS button on the pro-
jector twice in order to display the window shown at lower right.
Remote control
2
Press the pointer buttons to adjust the image size.
Remote control
[ ] / [ ] buttons Increase the image size
[ ] / [ ] buttons Reduce the image size
3
When the desired image size is selected, press the OK button or the ZOOM button.
Projector
Push twice
Projector
58
Screen