Setting Up Email [Mail] - Canon REALiS WUX4000 User Manual

Setting Up the Network

■Setting Up Email [Mail]

From [Mail] in the settings window, you can set the items necessary to send error
mails and test mails. For the setting procedure, refer to "Displaying and Configuring
the Network Configuration Screen" (P142).
Item
To:
Cc:
From:
SMTP server IP address
SMTP server port number
SNTP server IP address
Time zone
Mail resend interval
Mail resend times
Error report
Explanation
Enter the recipient address for error
mails in 1-byte alphanumeric char-
acters and symbols (1 - 63 charac-
ters).
Enter the CC address for error mails
in 1-byte alphanumeric characters
and symbols (1 - 63 characters).
Enter the sender address for error
mails in 1-byte alphanumeric char-
acters and symbols (1 - 63 charac-
ters).
Enter the SMTP server IP address in
1-byte numbers.
Enter the SMTP server port number
in 1-byte numbers (1 - 65535).
Enter the SNTP server IP address in
1-byte numbers.
Select the time zone where the pro-
jector is used.
Enter the interval for resending mail
when an error occurred (units: sec-
onds) within the range of 0 - 59 sec-
onds using 1-byte numbers.
Enter the number of times to resend
mail when an error occurred within
the range of 0 - 255 using 1-byte
numbers.
Select whether to turn the error mail
sending function on or off.
148
Factory default setting
MailUserAccount
<Blank>
Projector@canon.co.jp
0.0.0.0
25
0.0.0.0
(GMT) Dublin, Lisbon,
London
10
3
OFF