2-34 ADS TRITON+ Manual
Surcharge Pressure Depth Sensor
The surcharge pressure depth sensor in the Surface Combo sensor
measures pressure depth using the same technique as the other
combo sensors, except from the top of the pipe. Since it can
provide an accurate depth only when submerged, the data from this
sensor is useful only under full-pipe or surcharge conditions. The
Surface Combo Sensor offers three options for pressure
measurement: 0 - 5 PSI (0 - 0.34 Bar), 0 - 15 PSI (0 - 1.03 Bar),
and 0 - 30 PSI (0 - 2.07 Bar).
Inclinometer Sensor
The Inclinometer sensor utilizes an integrated accelerometer in a
sealed and intrinsically safe housing to accurately determine angle
measurements for ascertaining orientation of flood gates. Mounting
is on any flat surface of the wastewater collection side of the flood
gate.
Inclinometer Sensor