Installing The Sensors In The Pipe; Standard Installation - ADS TRITON+ Installation, Operation And Maintenance Manual

Installing the Sensors in the Pipe

This section includes the procedures for performing sensor
installations using one of the following methods:
Standard Installations
Special Installations
Note: When installing a monitor with wireless
communications, it is very important to test the TRITON+
with the SIM card installed to ensure the entire system
functions and to verify network quality of service before
installation. This check should be done before field
deployment and again at the monitoring site before
installing the monitor. Refer to Chapter 3,
Communication, for more information.

Standard Installation

Performing a standard sensor installation involves the following
process:
Gathering the parts and supplies
Gathering the tools and equipment
Assembling the ring
Mounting the sensors on the ring
Securing the cables to the ring
Installing the ring in the pipe
Sensor Installation and Connection 5-7