Collecting Data From The Monitor - ADS TRITON+ Installation, Operation And Maintenance Manual

4-100 ADS TRITON+

Collecting Data from the Monitor

Collect data from a monitor in the following way:
1. Select the monitor from which you want to collect data from
the Location Name drop-down list in the Monitor section on
the ADS Qstart
2. Click on the Collect button in the Functions section.
The Collect Span dialog displays for designating the date/time
range for which you want to collect the data.
3. Designate the date and time from which you want to begin
collecting data from the monitor in the Start field. Qstart
defaults to a start date and time of one second past the last data
point stored in the local directory or network for the current
location. To edit a particular value in the Start date or time
field, select the value and enter a new value or use the up/down
arrows to advance through the numbers until you reach the
desired value.
4. Designate the date and time up to which you want to collect
data from the monitor in the End field. The end date and time
in Qstart
To edit a particular value in the corresponding date or time,
select the value and enter a new value or use the up/down
arrows to advance through the numbers until you reach the
desired value.
5. Click on the OK button.
Qstart
initiates the data collection process. Refer to the status bar on
the dialog to monitor the progress of the collect. The View
Data dialog displays when data collection is complete.
Note: You can discontinue the data collection process at
any time by clicking on the Abort button.
®
Manual
XML
dialog.
XML
default to the date and time on the local computer.
XML
establishes communication with the monitor and
XML