Activating The Sim Card - ADS TRITON+ Installation, Operation And Maintenance Manual

Activating the SIM Card

TRITON+ monitor uses a SIM card which must be activated (to
allow for wireless communication) within 48 hours of monitor
activation and before heading to the field to install the monitor.
Use the following to activate the SIM card:
1. (applicable only to global 3G wireless monitors) Order an
AT&T SIM card with public or private static IP address (ADS
p/n 8000-0560-ASIM) or ADS Verizon SIM card with private,
static IP address (ADS p/n 8000-0561-VSIM). Once received,
install the SIM card in the SIM Card Holder. Refer to
Replacing the SIM Card in Chapter 11 for more information
on replacing the SIM card in monitors with a SIM card
enclosure on the monitor top.
2. Request activation of the new ADS SIM card by emailing
ADSEODIP@idexcorp.com.
specific TRITON+ monitor and the last four digits of the SIM
card number (the 20-digit number found on the attached SIM
punch-out card) as well as the name of the municipality or
company requesting the activation. ADS employees should
also include the project name and job number as part of the
request.
Include the serial number of the
SIM Punch-out Card for Verizon LTE-M
Communication 3-5