Triton+ Flow Monitor; Communications - ADS TRITON+ Installation, Operation And Maintenance Manual

TRITON+ Flow Monitor

The TRITON+ flow monitor is contained in a waterproof, airtight,
cylindrical, high-impact ABS plastic canister housing. It contains a
single processor board attached to the inside of the aluminum
monitor top, a power regulator and cellular modem built into a
protective dome, and a replaceable battery pack.
MONITOR TOP & REGULATOR DOME
Exploded view of TRITON+ (processor board resides between the monitor

Communications

ADS offers remote (wireless) and on-site (direct) communication
options for the TRITON+ monitor.
Wireless Communication
Wireless communication occurs over the 3G/4G UMTS/HSPA+
network, the Verizon
network using TCP/IP (Transmission Control Protocol/Internet
Protocol). The TCP/IP networks facilitate high-speed, low-cost,
efficient digital communication in coverage areas using static and
dynamic IP address services. ADS TRITON+ monitors supporting
Verizon network services have been approved through the Verizon
Wireless Open Development program.
Remote communication with the monitor occurs over the network
through an internal modem located in the monitor's regulator dome,
provided a static IP address is in use. If the monitor is using a
IS 12 VOLT BATTERY
top and protective regulator dome)
®
LTE-M network, or the AT&T LTE-M
System Overview
EXTERNAL HOUSING
2-5