Wiring The Power Supply To The Expac - ADS TRITON+ Installation, Operation And Maintenance Manual

6-18 ADS TRITON+ Manual
Input terminal connections on power supply for AC cable

Wiring the Power Supply to the ExPAC

Note: The XIO and XBUS both come from the factory
with the ExPAC and power supply pre-wired in the
XIO/XBUS enclosure. Therefore, for applications
involving the XIO or XBUS, proceed to the next section,
Running the Ground Wire. Instructions for installing and
wiring the power supply to the ExPAC have not been
included for applications involving an XIO or XBUS.
The next step in connecting the monitor to external power involves
running two wires between the power supply and the ExPAC. ADS
recommends using 18- to 22-gauge stranded wire. However, for
runs longer than 20 feet, use 14-gauge wire.
AC TERMINAL
CONNECTIONS
Hot
Ground
Neutral