Upgrading The Monitor Firmware - ADS TRITON+ Installation, Operation And Maintenance Manual

Upgrading the Monitor Firmware

XML
Qstart
monitor that may include new monitor or device features and
capabilities or performance improvements.
Upgrade the firmware in the monitor in the following way:
Note: ADS recommends collecting the monitor data
before performing a firmware upgrade.
1. Select the monitor for which you want to upgrade the firmware
from the Location Name field in the Monitor section on the
ADS Qstart
2. Click on the Upgrade button in the Functions section.
The Open dialog displays.
3. Browse to the firmware file and then click on the Open button.
Qstart
selected monitor and downloads the new firmware to the
monitor. The status bar indicates when the download is
complete.
4. Once the firmware download is complete, click on the green
Hangup button in the Functions section to discontinue
communication with the monitor.
5. Wait at least 30 seconds, and then click on the Activate button.
The computer reconnects to the monitor and downloads the
appropriate information and files. Once activation has
completed, the status bar displays Activate successful.
6. Click on the Hangup button to disconnect from the monitor.
Qstart
documents the date and time at which the upgrade occurred,
the result (success or failure), the previous version of the
firmware, and the name of the file downloaded during the
upgrade.
Configuration and Activation
enables you to download updated firmware to the
XML
dialog.
XML
initiates and establishes communication with the
XML
generates a log entry of the firmware upgrade that
4-103