Installing the Sensors in the Manhole
Structure
This section includes the procedures for performing installations in
the manhole structure for the following ADS TRITON+ sensors:
Long Range Depth Sensor
ParaDepth Sensor
ParaFlow Sensor
Surface Combo Sensor
Ultrasonic Depth Sensor
Caution: Handle all sensors and cables with extreme
care. The sensors and cables contain delicate mechanisms
and electronics. Keep sharp objects away from sensor
cables, and avoid stepping or placing heavy objects on the
cable during installation. Avoid contacting the metal
connector at the end of the Surface Combo or Ultrasonic
Depth Sensor cable (or any other sharp object) with the
Teflon-coated crystals on the sensor.
Long Range Depth Sensor Installation
Performing a standard Long Range Depth Sensor installation
involves the following process:
Selecting an installation location
Gathering parts and supplies
Measuring manhole depth
Installing the Mounting Bar
Adding Extension Rods to the Mounting Bar (as needed)
Installing Wall Mount Bar (as needed)
Installing the sensor on the Mounting Bar
Sensor Installation and Connection 5-59