Table of Contents
Advertisement
8-6
ADS TRITON+ Manual
5.
After the Inclinometer is securely attached to the flood
gate, connect the sensor cable to the COMM + EXT
PWR port on the top of the ADS TRITON+ monitor.
6.
Configure the ADS TRITON+ monitor using Qstart
selecting the Inclinometer as one of the devices. See
Chapter 4,
depth instructions on how to configure and activate an
ADS TRITON+ monitor.
Inclinometer Data
When activated with an Inclinometer, data collected from the
TRITON+ will include the ANGLE entity. Data for the ANGLE
entity will either be positive points or negative points when the gate
opens, dependent on the installation position of the sensor on the
flood gate.
The following illustrations show the expected ANGLE data values
based on the installation position (with the assumption that the
Inclinometer is installed on the wastewater side of the flood gate).
Stainless steel clamp
Inclinometer attached using a Stainless Steel Clamp
Configuration and
Activation, for more in-
XML
,
Advertisement
Table of Contents
Troubleshooting
