Replacing The Sim Card - ADS TRITON+ Installation, Operation And Maintenance Manual

11-24 ADS TRITON+ Manual

Replacing the SIM Card

TRITON+ monitors supporting global Worldwide wireless network
services handle wireless communications through an internal
modem that is supported by a replaceable SIM card that resides in
an enclosure on the monitor top and/or within the monitor
Regulator/Modem bowl. The SIM card typically requires
replacement only upon failure, which is rare, or when a change in
wireless carrier occurs. The monitor must be deactivated before
replacing the SIM card!
Note: The SIM cards in the 8000-FST-IM-4VZ, 8000-
FST-IM-EP-4VZ, 8000-FST-IM-4WW-VZW and 8000-
FST-IM-EP-4WW-VZW are specifically linked to the
modem in the monitor. The original SIM card must be
"un-paired" from the modem before swapping in a new
SIM card.
Replacing the SIM Card in Monitors with a SIM Card
Enclosure on the Monitor Top
Replace the SIM card (ADS p/n 8000-0560-ASIM (AT&T), 8000-
0561-VSIM (Verizon), or customer-supplied) in monitors with a
SIM Card enclosure on the monitor top in the following way:
Note: The only service or maintenance activities ADS
permits within the monitor chassis are battery pack, battery
PCB, regulator/modem unit, SIM card replacement (as
applicable) and fuse replacement. Therefore, do not
handle, alter, modify, remove, or replace any other
components inside the monitor. Such actions will void the
monitor warranty agreement and the IS certification.
Note: Move the monitor away from the hazardous area
before opening the monitor to replace the battery.
1. Deactivate the monitor through Qstart
XML
.