Final Instructions - ADS TRITON+ Installation, Operation And Maintenance Manual

6-36 ADS TRITON+ Manual
External power/communication cable attached to COMM + EXT PWR port

Final Instructions

1. Verify the following before connecting to the power source:
External power cable is connected to both the AC power
source or distribution device (i.e., disconnect, fuse, or
breaker box) and the power supply (when applicable)
Power supply (or appropriate DC power source) is
connected to the ExPAC
Ground wire is connected to both the XIO/XBUS ground
terminal block/ExPAC (as applicable) and the existing
earth ground
Communication cable is connected to both the monitor and
the ExPAC
Grip fittings on the cable glands are tightened securely and
XIO/XBUS (or other enclosure cover) is closed and
latched
2. Supply power to the system.
COMM + EXT PWR CABLE
COAXIAL Stretch Tape
to XIO, XBUS, or ExPAC Enclosure
10-Gauge Ground Wire
COMM + EXT PWR Port
TRITON+ MONITOR
and ground wire secured to bolt on top of monitor