Starting The Remote Ui - Canon imageCLASS D1120 Basic Operation Manual

Starting the Remote UI

Starting the Remote UI
To start the Remote UI, follow the procedure described below.
Before you start the Remote UI, perform the followings:
– Select <VIEW IP ADDRESS> in <NETWORK SETTINGS> located in <SYSTEM SETTINGS>, and verify the IP address of the
machine. If you do not know the IP address, consult with your network administrator. (See "Confirming IP Address
Settings, " in the e-Manual.)
– If the IP address is not displayed, check if the machine is correctly connected to the computer. For details, see "Set Up
Network Connection, " in the e-Manual.
– Set <REMOTE UI> to <ON> in <SYSTEM SETTINGS>. (See "Restricting the Remote UI, " in the e-Manual.)
1
Prepare the Network.
Set up the machine for use in a network, then
connect the machine and the computer to your
network router or a hub.
For details, see "Set UP Computers and Software, "
in the Starter Guide.
2
Start the web browser.
10-4
3
Enter the IP address of the machine in
[Address] or [Location], then press [Enter]
on the keyboard.
Example: http://xxx.xxx.xxx.xxx/
For details on how to check the IP address, see
"Confirming IP Address Settings, " in the e-
Manual.
The Remote UI screen appears.