Cleaning the Machine
3
Press
or
CLEANING>, then press [OK].
A D J U S T . / C L E A N I N G
2 . F E E D E R
4
Load 10 sheets of blank LTR paper into
the ADF, then press [OK].
S E T
1 0
P R E S S
ADF cleaning starts. When finished, the display
returns to the standby mode.
Scanning Area
Keep the scanning area clean to avoid dirty copies
or faxes to be sent.
●
Platen Glass
Clean the platen glass and the underside of the ADF
by following the procedure below.
1
Turn OFF the main power switch and
disconnect the power cord.
2
Open the ADF.
11-4
to select <FEEDER
C L E A N I N G
S H E E T S
I N
A D F
O K
K E Y
3
Clean the platen glass and the underside
of the ADF with a cloth dampened with
water. Then, wipe the area with a soft, dry
cloth.
Do not dampen the cloth too much, as this may
tear the document or damage the machine.
4
Close the ADF.
Be careful not to get your fingers caught.