Checking The Fax Log - Canon imageCLASS D1120 Basic Operation Manual

2
Press or
list.
5 0 0 3 1 5 : 5 5
If you want to delete a job, go to the next step.
Otherwise, press
standby mode.
3
Press or
want to delete, then press [OK].
5 0 0 1 1 5 : 5 3
If you select <JOB CANCEL> in step 1, skip to
step 5.
4
Press or
then press [OK].
5 0 0 1
C A N C E L
You can forward the selected job to another
destination by selecting <FORWARD>. For
information on forwarding received documents,
see "Sending Documents in Memory to a Different
Destination, " in the e-Manual.
5
Press to select <YES>.
C A N C E L ?
< Y E S
If you do not want to cancel the job, press
select <NO>.
to scroll through the job
R X T R M . . .
0 1 2 X X X X X X X
[Stop/Reset] to return to the
to select the job you
R X S T N D B Y
1 2 3 X X X X X X X
to select <CANCEL>,
N O >
Checking/Changing the Status of Fax Documents in Memory
6
Press
standby mode.
For the D1180/D1170, you can check for the
arrival of I-faxes at any time if you select <I-FAX>
in step 1. To be able to check the arrival of I-fax
using
first set <POP> (Post Office Protocol) to <ON> in
<E-MAIL/I-FAX> in <NETWORK SETTINGS> in
<SYSTEM SETTINGS>.

Checking the Fax Log

You can view the results of fax transactions that list
all faxes sent or received.
If you set <CHECKING THE LOG> to <OFF> in <SYSTEM
SETTINGS>, the job log does not appear in the display.
1
Press
repeatedly to select <TX/RX LOG>, then
press [OK].
T X / R X
2
Press
transmission/reception result.
0 0 0 1
3
Press
standby mode.
to
You can also check the results of fax transactions
(transmission or reception) by printing the TX
report, RX report, or Activity report. For details, see
"Printing Reports Automatically, " in the e-Manual
and "Printing Reports and Lists Manually, " in the e-
Manual.
[Stop/Reset] to return to the
[Job Cancel/Status Monitor], you must
[Job Cancel/Status Monitor]
L O G
or to view the required
1 5 : 5 0 T X
0 1 2 X X X X X X X
[Stop/Reset] to return to the
O K
6-63