Canon imageCLASS D1120 Basic Operation Manual page 222

4
Enter the required data.
The required data differs depending on the
authentication mode you are using.
■ For default settings:
① Select [Administrator Mode] or [End-User
Mode].
② Enter the password or user name and click
[OK].
■ In case no management mode is set, and
system manager ID and password are set:
① Select [Administrator Mode] or [End-User
Mode].
② For Administrator Mode, enter the system
manager password, and click OK. For End-
User Mode, enter the user ID and click [OK].
Starting the Remote UI
10-5