To 2-Sided Copying - Canon imageCLASS D1120 Basic Operation Manual

1 to 2-Sided Copying

You can make 2-sided copies from 1-sided
documents.
1
Place documents.
For details, see "Placing Documents, " on p. 2-4.
2
Press [COPY].
3
Press [2-Sided] repeatedly to select <1
>2-SIDED>, then press [OK].
1 > 2 - S I D E D
If there are odd number of documents when the
1-Sided to 2-Sided mode is used, the back side of
the last copy is left blank.
4
Press or
or <CALENDAR TYPE>, then press [OK].
T Y P E O F
B O O K
– <BOOK TYPE>: The front and back sides of the
copy will have the same top-bottom
orientation.
– <CALENDAR TYPE>: The front and back sides
of the copy will have the opposite top-
bottom orientation.
For the landscape oriented documents:
When <BOOK TYPE> is selected, the front and
back sides of the copy will have the opposite top-
bottom orientation. When <CALENDAR TYPE> is
selected, the front and back sides of the copy will
have the same top-bottom orientation.
5
Use – [numeric keys] to enter the
desired copy quantity (1 to 99).
1 0 0 % *
T E X T / P H O T O
6
Press [Start].
If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page. When scanning is
complete, press [OK].
– To cancel all settings, press
– When you switch the mode by pressing the
mode keys such as
[FAX], all settings will be also canceled. If
you want to keep the settings, store the settings
as follows:
[Menu] → <COPY SETTINGS> → <STANDARD
SETTINGS> → <2-SIDED> (See "COPY SETTINGS, "
on p. 13-5.)
– You can skip step 4. In this case, the machine
scans 1-sided documents to make 2-sided,
<BOOK TYPE> copies.
2-Sided Copying
to select <BOOK TYPE>
O U T P U T
T Y P E
L T R
0 1
[Stop/Reset].
[SEND/FAX]/
3-25