Setting The Sleep Mode; Timer Settings - Canon imageCLASS D1120 Basic Operation Manual

Timer Settings

Timer Settings
The timer settings enables you to set the Sleep Mode, Auto Clear Time, and the Daylight
Saving Time.

Setting the Sleep Mode

If the machine remains idle for a certain period of
time, it automatically enters the Sleep mode. The
default settings are <ON> and <5MIN>.
1
Press [Menu].
2
Press or
SETTINGS>, then press [OK].
M E N U
7 . T I M E R
3
Press or
TIME>, then press [OK].
T I M E R
4 . A U T O
4
Press or
press [OK].
A U T O
1-18
to select <TIMER
S E T T I N G S
to select <AUTO SLEEP
S E T T I N G S
S L E E P T I M E
to select <ON>, then
S L E E P T I M E
5
Press
interval, then press [OK].
T I M E R
– You can set the interval from 3 to 30 minutes
(in one-minute increments).
– You can also enter values using
[numeric keys].
6
Press
standby mode.
–
machine enters the Sleep mode.
– To resume the normal mode from the Sleep
mode, press
panel.
– To enter the Sleep mode manually, press
– The machine will not enter the Sleep mode
when:
•
•
•
O N
•
•
•
– The machine will leave the Sleep mode when:
•
•
•
•
or to select the desired
[Stop/Reset] to return to the
[Energy Saver] lights green when the
[Energy Saver] on the operation
[Energy Saver] on the operation panel.
the machine is in operation
the Processing/Data indicator lights or blinks
a message appears on the display and the
Error indicator blinks
paper is loaded in the multi-purpose tray
a paper jam occurs in the machine
the handset of the external telephone is off
the hook
you press [Energy Saver] on the operation
panel
a fax is received*
the handset of the external telephone is off
the hook*
a print job is sent from a computer, and the
print is started
*For the D1180/D1170/D1150
5 M I N .
–