Basic Scanning Operations
Basic Scanning Operations
This section describes the basic procedures for scanning documents.
Scanning Documents to a
Computer
You can scan documents and transmit the scanned
data to your computer using the operation panel of
the machine.
–
Your machine must be connected via an USB cable and the
USB scanner driver must be loaded to scan. This machine does
not support network scanning.
–
Scanning speed may be slower when sending an e-mail or
scanning documents to a file server in B&W format.
1
Place documents.
2
Press
The SCAN indicator lights up and the machine
enters the scan standby mode.
8-6
[SCAN] on the machine.
3
Press
[Start] on the machine.
–
If you are asked to select a program to launch,
select "MF Toolbox Ver4.9. " The scanned
document will be processed according to
your settings.
–
When scanning is complete, a folder with the
scanning date will be created in the [My
Pictures] folder in the [My Documents] folder,
and your document will be saved in this
folder. (For Windows Vista/7, the folder will be
created in the [Pictures] folder.)
Scanning Documents to a File
Server (D1180/D1170)
This section describes the basic procedure for
sending scanned documents to a computer that
acts as a file server on a network.
You can specify the file server addresses only with one-touch
keys, coded dial codes, or
[Address Book]. You cannot specify
a file server using
–
,
[numeric keys] and
"Specifying Destinations (Scan to File Server), " in the e-Manual.
1
Place documents.
[Tone]. See