Canon imageCLASS D1120 Basic Operation Manual page 259

Display Messages
Message
MEMORY FULL
NOT AVAILABLE NOW
NOT REGISTERED
OVER PAGE LIMIT
PAPER IN MP TRAY
REMOVE PAPER
PAPER JAM
LIFT PANEL TO OPEN
PHONE OFF HOOK
HANG UP PHONE
PREPARING
SCANNER..
PLEASE WAIT
12-16
Description
– The machine is full of jobs.
– The number of TX/RX jobs that can be
stored in memory reached the maximum.
– You pressed the one-touch key or coded
dial code that has already been registered,
when you are registering group addresses.
– You selected the group dialing that has
already been registered, when you are
registering a one-touch key or coded dial
code.
No recipient is registered for the one-touch
key or coded dial code you pressed.
You cannot print because the page limit has
been reached.
Paper is loaded in the multi-purpose tray.
Paper jams have occurred in the machine.
<OPEN PRINTER COVER> or <OPEN REAR
COVER> appears alternately.
The external telephone is off the hook.
The machine is not ready for scanning.
Action
– Print, send, or delete any documents
stored in memory.
– Divide the document stack or data into a
few parts and try again one by one.
–
Send the document with low resolution.
– When this message appears during using
the ADF, the scanning document stops
halfway. In this case, clear the paper jam
from the ADF.
– The maximum numbers of jobs that can be
stored in memory are as follows (Based on
the condition that the other party sends
the fax by the imageCLASS D1180 with ITU-
T No.1 Chart standard mode); Up to 70 jobs
for sending or 90 jobs for receiving, 95 fax
jobs including sending and receiving, or
75 e-mail and I-fax jobs for receiving. Wait
for the machine to send any documents
in memory. Also print, send, or delete any
documents stored in memory.
Register the one-touch key or coded dial
code that is not used.
Register the recipients before using the
Address Book function.
Contact your system manager.
Remove the paper from the multi-purpose
tray. The machine will not print faxes, reports,
or lists when paper is loaded in the multi-
purpose tray. They will be stored in memory.
Clear the paper jam (See "Paper Jams,"
on p. 12-4) and reload paper in the paper
cassette or multi-purpose tray. The cover
must be opened and closed to resume the
current job.
Hang up the external telephone.
Wait until the machine is ready.