Adjusting Manually - Canon imageCLASS D1120 Basic Operation Manual

Adjusting Manually

You can adjust the density to the most appropriate
level for the document manually.
1
Place documents.
For details, see "Placing Documents, " on p. 2-4.
2
Press [COPY].
3
Press [Density] repeatedly to select the
manual mode.
4
Press or
density, then press [OK].
D E N S I T Y
- L T
: to make light documents darker
: to make dark documents lighter
– To cancel all settings, press
– When you switch the mode by pressing the
mode keys such as
[FAX], all settings will be also canceled. If
you want to keep the settings, set the density as
follows:
[Menu] → <COPY SETTINGS> → <STANDARD
SETTINGS> → <DENSITY> → <MANUAL> (See
"COPY SETTINGS, " on p. 13-5.)
to adjust the copy
D K +
[Stop/Reset].
[SEND/FAX]/
5
Use – [numeric keys] to enter the
desired copy quantity (1 to 99).
1 0 0 %
T E X T / P H O T O
6
Press [Start].
If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page.
Adjusting Density
L T R
0 1
3-15