Canon imageCLASS D1120 Basic Operation Manual page 258

Message
CHECK DOCUMENT
A document jam may have occurred in the
ADF.
COLOR MODE IS SET You have specified multiple recipients when
using a color sending.
CANNOT MULTI DEST
TX
DATA ERROR
The machine may have trouble.
PRESS START KEY
DOCUMENT TOO The document fed from the ADF is longer
than 24 7/8" (630 mm), or is not feeding
LONG
correctly.
FEEDER PAPER JAM
A document jam may have occurred in the
ADF.
CHECK THE FEEDER
INITIALIZING...
This message appears when turning ON the
main power switch, or when the machine is
PLEASE WAIT
not ready for printing.
LOAD CORRECT The size of the paper in the paper cassette
or multi-purpose tray is different from that
PAPER
of the paper specified in <CASSETTE 1>,
<CASSETTE 2> (optional) or <MP TRAY>,
which are displayed by pressing
Settings].
LOAD PAPER
–
–
Description
No paper is loaded in the paper cassette
or multi-purpose tray when copying or
printing.
No paper is loaded in the paper cassette
or multi-purpose tray when printing a
received document.
Or, when printing a report or list, this
message appears if the paper size is not
appropriate for printing a report or list
even if paper is loaded. This error message
appears with one of the messages below.
<CHANGE REG'D SIZE/→PAPER SETTINGS>
<CANNOT PRINT RX DATA/FIX ERROR TO
PRINT>
Remove the jammed document.
When using a color sending, you can specify
only one recipient. Send one by one, or use
black and white sending.
Press [Start] to restore all settings to the
default. If the message persists, contact
Canon Customer Care Center.
– Scan the document on the platen glass.
– Reduce the length of the document to
within 24 7/8" (630 mm), then try again.
Remove the jammed document.
Wait until the message disappears.
Load the correct size paper or change the
paper size in <CASSETTE 1>, <CASSETTE
2> (optional) or <MP TRAY>, which are
displayed by pressing
[Paper details, see "If <LOAD CORRECT PAPER> is
displayed," on p. 12-23.
– Load paper correctly. Then press [OK] when
using the paper cassette.
– Load paper correctly. Then press [OK] when
using the paper cassette.
For report or list, set the paper size to
<A4>, <LTR>, <LGL>, <FLSP>, <OFICIO>,
<B-OFI>, or <M-OFI>, and then load paper
of the same size.
Display Messages
Action
[Paper Settings]. For
12-15